The Vehicle Dynamics Engineer is responsible for analyzing, developing, and optimizing vehicle dynamic performance, ensuring the vehicle delivers the required levels of handling, ride comfort, stability, safety, and overall driving performance. The role involves simulation, testing, data analysis, and close collaboration with studio engineering, chassis, body-in-white, powertrain and supply chain teams.

Activities, engagement, responsibilities :

• Assist in the development and optimization of vehicle dynamics attributes, including handling, stability, ride, steering response, braking, and overall drivability.
• Assist in the definition and analyzation of vehicle dynamics targets and KPIs, translating vehicle-level requirements into measurable engineering objectives.
• Perform multibody vehicle simulations and kinematic/compliance analyses to evaluate suspension, steering, and chassis behavior.
• Conduct vehicle testing and data acquisition, including proving-ground and road testing, and correlate simulation results with physical test data.
• Support vehicle-level development and tuning, identifying root causes of performance deviations and proposing engineering solutions.
  Perform simulation-to-test correlation, model validation, sensitivity studies, and design optimization.
• Collaborate with studio engineering and powertrain teams to ensure consistent vehicle performance.
• Prepare technical reports, test plans, simulation results, engineering specifications, and recommendations for design decisions.
• Support prototype and production vehicle development, including issue investigation and validation.

Knowledge of software systems such as Adams Car, CarSim/TruckSim, Altair MotionView, MATLAB/Simulink, SOLIDWORKS, ANSYS etc. is a plus.

Experience with DAQ and vehicle instrumentation tools is desirable.

Very good knowledge of the English language is a must !

Working timings: Full-time, on-site
Location: Athens, Greece

Send your CV to jobs@elvox.net referencing job-code #260901

The Chassis / Skateboard Structure Engineer is responsible for the design, development, analysis, and validation of vehicle chassis systems, ensuring the required levels of structural performance, handling, ride comfort, durability, safety, and manufacturability. The role involves close collaboration with studio engineering, vehicle dynamics, BIW and powertrain teams throughout the vehicle development process.

Activities, engagement, responsibilities :

• Design and develop chassis components and systems, including subframes, suspension structures, steering, braking, and related mounting systems.

• Define and manage chassis architecture, hard points, interfaces, and technical specifications according to vehicle-level requirements.
• Perform structural, stiffness, strength, fatigue, and durability analyses to ensure component and system performance.
• Support suspension and steering geometry development, including kinematics, compliance, wheel alignment, and load-path analysis.
• Select and optimize materials, manufacturing processes, joints, bushings, and mounting solutions considering performance, cost, weight, and manufacturability.
• Conduct prototype and vehicle testing, analyze test results, and support correlation between simulations and physical measurements.
• Investigate chassis-related failures and performance issues, identifying root causes and implementing corrective actions.
• Collaborate with design studio, vehicle dynamics and powertrain teams to ensure system-level integration.
• Manage technical documentation, engineering drawings, requirements, change requests, and design validation plans.
• Support prototype builds, design reviews, development milestones, and production release, ensuring compliance with applicable standards and project targets.

Knowledge of software systems such as SOLIDWORKS, CATIA, Siemens NX, PTC CREO, ANSYS, ABAQUS etc. is a plus.

Experience with GD&T, tolerance stack-up, and dimensional quality tools is highly desirable.

Very good knowledge of the English language is a must !

Working timings: Full-time, on-site
Location: Athens, Greece

Send your CV to jobs@elvox.net referencing job-code #260901

The BIW / Trim Design Engineer is responsible for the development, integration, and validation of the vehicle BIW, Trims and related body structures, ensuring the required levels of structural performance, stiffness, durability, safety, weight, manufacturability, and dimensional quality. The role requires close collaboration with styling, studio engineering and chassis teams throughout the vehicle development process.

Activities, engagement, responsibilities :

• Design and develop BIW structures and body components, including body panels, interior/exterior trims, pillars, roof, floor, doors, cross-members, reinforcements, and structural members.
• Define and manage body architecture, hard points, interfaces, and packaging requirements while ensuring integration with vehicle systems.
• Perform structural, stiffness, strength, fatigue, and durability analyses to meet vehicle performance and engineering targets.
• Develop and optimize body joints, welds, adhesives, fasteners, reinforcements, and load paths for structural performance and manufacturability.
• Support doors integration, including clearances, interfaces, alignment, kinematics, and functional requirements.
• Conduct digital mock-up, tolerance, gap & flush, and dimensional studies to ensure accurate body assembly and fit.
• Support prototype builds and physical testing, including body stiffness, durability, fatigue, corrosion, and abuse testing, and correlate results with simulations.
• Investigate structural, dimensional, and assembly-related issues, performing root-cause analysis and implementing corrective actions.
• Collaborate with styling, studio engineering and chassis teams to ensure design feasibility and system-level integration.
• Manage CAD models, engineering drawings, specifications, BOMs, design changes, and validation documentation through the vehicle development lifecycle.

Knowledge of software systems such as SOLIDWORKS, CATIA, Siemens NX, PTC CREO, ANSYS, ABAQUS etc. is a plus.

Experience with BIW manufacturing, plastic product design, composites, welding, adhesives, GD&T, tolerance stack-up, and dimensional quality tools is highly desirable.

Very good knowledge of English language is a must !

Working timings: Full-time, on-site
Location: Athens, Greece

Send your CV to jobs@elvox.net – referencing job-code #260803

The 3D Automotive Modeler is responsible for transforming vehicle design concepts and styling proposals into high-quality 3D surfaces, ensuring accurate interpretation of the designer’s intent while meeting engineering, Class-A surfacing, packaging, and manufacturing requirements. The role works closely with automotive designers, studio engineers, CAS/engineering teams, and other stakeholders throughout the vehicle development process.

Activities, engagement, responsibilities :

• Develop high-quality 3D exterior and interior automotive surfaces based on 2D sketches, design proposals, and styling requirements.
• Translate designer intent into accurate digital models, maintaining proportions, character lines, reflections, and surface continuity.
• Create and refine Class-A surfaces with appropriate curvature, continuity, and highlight quality.
• Develop concept, feasibility, and production-intent surfaces while maintaining design quality throughout the development process.
• Perform surface evaluation and quality checks, including curvature, zebra, isophote, reflection, and continuity analysis.
• Collaborate with styling, studio engineering and BIW teams to ensure surfaces are technically feasible.
• Integrate engineering and packaging constraints while preserving the original styling intent and vehicle proportions.
• Support the development of surface transitions, panel breaks, shut lines, gaps, and flush conditions for production feasibility.
• Prepare and manage 3D models, surface data, design iterations, and technical deliverables according to project milestones.
• Participate in design reviews and digital/physical model evaluations, incorporating feedback and delivering refined surface solutions.

Experience working with Autodesk Alias is a must. 

Strong knowledge of NURBS modeling is essential.

Knowledge of software systems such as ICEM Surf, Rhino, CATIA etc. is a plus.

Previous experience in automotive-motor-technologies preferred. 

Very good knowledge of English language is a must !

Working timings: Full or part-time
Location: on-site Athens, Greece or optional hybrid

Send your CV to jobs@elvox.net – referencing job-code #260802

Activities, engagement, responsibilities :

• Assist in the documentation of Electric & Electronic architecture / hardware specifications for power electronics, inverter, sensors, thermal systems, charging ports, connectors, wiring, instrument / display clusters, etc.
• Assist in the implementation into our electric vehicle(s).
• Develop the best architecture and configuration of such systems into our vehicle(s).
• Assist in the selection of existing and/or re-/design / development and testing of such systems for our electric vehicle(s).
• Participate in the design and implementation of software algorithms for such systems functionalities and accessories.
• Conduct research on emerging technologies and trends in the respective automotive systems to enhance product efficiency and performance.
• Collaborate with cross-functional teams to integrate components into our vehicle prototypes.
• Support troubleshooting and debugging efforts for software and hardware issues.
• Contribute to the optimization of systems & algorithms for improved energy efficiency and longevity.
• Participate in validation and verification activities for the respective automotive systems, including simulation, testing, and analysis.
• Assist in the development of diagnostic tools and dashboards for monitoring systems, parameters and performance.
• Engage in continuous learning and skill development training sessions, and hands-on experience with cutting-edge technologies in electric vehicle systems, mentored and supported by the management and the team members.

Knowledge of software systems such as MATLAB, SOLIDWORKS, ANSYS, NX, etc. is a plus.

Previous experience in automotive E/E technologies preferred.

Very good knowledge of English language is a must !

Working timings: Full-time, on-site
Location: Athens, Greece

Send your CV to jobs@elvox.net – referencing job-code #250204

The Automotive Software Engineer is responsible for the design, development, and integration of software systems across the vehicle platform, spanning embedded ECU programming, Machine Learning-driven diagnostics, and full-stack applications, ensuring the code meets the reliability and quality standards required for automotive use. The role involves close collaboration with the software, telematics, electrical and commercial teams throughout the product development process.

Activities, engagement, responsibilities:

• Design and develop a Vehicle Health Monitoring Platform as a full-stack web application.
• Design the architecture of a Predictive Maintenance ML algorithm and implement it end to end.
• Develop and maintain software for vehicle ECUs.
• Design and develop an Asset Management System for the full lifecycle of a vehicle.
• Build and maintain APIs connecting the platform’s various systems.
• Implement CI/CD pipelines and ensure containerization of all projects.
• Set up and manage servers and infrastructure, handling DevOps responsibilities across the stack.
• Manage technical documentation, code repositories, requirements, and version control across projects.

Knowledge of Python is a must.
Full-stack web development experience is a must.
Machine Learning experience is a plus.
Prompt engineering skills are highly desirable.
Experience with Linux and embedded systems is a plus.

Very good knowledge of English language is a must !

Working timings: Full-time, on-site
Location: Athens, Greece

Send your CV to jobs@elvox.net – referencing job-code #260904

Activities, engagement, responsibilities :

• Assist in the selection of existing and/or new-/re-/design / development / (re-)programming and testing of such systems for our electric vehicles.
• Assist in the documentation of electric Motors specification, Motor Control Unit (MCU) architecture / hardware specifications and implementation into our electric vehicle(s).
• Assist in the documentation of the Motors(s) / Propulsion System architecture / hardware specifications and implementation into our electric vehicle(s).
• Participate in the design and implementation of adaptations on hardware & software algorithms for such systems functionalities and accessories.
• Conduct research on emerging technologies and trends in the respective automotive systems to enhance product efficiency and performance.
• Collaborate with cross-functional teams to integrate components into our vehicle prototypes.
• Support troubleshooting and debugging efforts for software and hardware issues.
• Contribute to the optimization of systems & algorithms for improved energy efficiency and longevity.
• Participate in validation and verification activities for the respective automotive systems, including simulation, testing, and analysis.
• Assist in the development of diagnostic tools and dashboards for monitoring systems, parameters and performance.
• Engage in continuous learning and skill development training sessions, and hands-on experience with cutting-edge technologies in electric vehicle systems, mentored and supported by the management and the team members.

Knowledge of software systems such as MATLAB, SOLIDWORKS, ANSYS, NX, etc. is a plus.

Previous experience in automotive-motor-technologies preferred.

Very good knowledge of English language is a must !

Working timings: Full-time, on-site
Location: Athens, Greece

Send your CV to jobs@elvox.net – referencing job-code #250201

Activities, engagement, responsibilities :

• Assist in the documentation of the functionality of elvoX’s VHM Platform, and its system specifications.
• Participate in the design and development of embedded software algorithms, APIs and cloud-based systems for vehicle diagnostics, predictive maintenance, and real-time health monitoring.
• Support the development of intuitive dashboards and visualizations for system status, fault alerts, and maintenance insights — developing APIs.
• Contribute to the integration, testing, data read-out, processing of data from sensors and ECUs related to vehicle condition monitoring.
• Contribute to the integration of safety measures, protocols, requirements, etc. related to the VHM.
• Assist in the implementation of diagnostic protocols (e.g., OBD-II), fault detection mechanisms, and data logging strategies into our electric vehicle(s).
• Research emerging technologies in connected vehicle diagnostics, OTA (Over-The-Air) monitoring, and AI-based fault prediction to enhance system intelligence and reliability.
• Collaborate with cross-functional teams (Electrical/Electronics, Mechanical, Systems) to ensure full system integration and functional coherence.
• Support debugging and validation efforts, including simulation, fault injection testing, and real-world data analysis.
• Assist in the development of internal tools for testing, monitoring, and validating platform performance and resilience.
• Engage in continuous learning and training activities with the support and mentoring of the team and management.

Very good programming knowledge in C/C++, Python, front-end (dashboard) design.

Knowledge of cloud technologies, database systems.

Familiarity with tools such as MATLAB/Simulink, embedded systems or telemetry/IoT systems.

Understanding of communication analysis tools (e.g., Vector CANoe, CANalyzer).

Security awareness in vehicle networks and data handling is a plus.

Experience in software development for automotive, automotive diagnostics or telematics platforms is considered a strong advantage.

Very good knowledge of the English language is a must !

Working timings: Full-time, on-site
Location: Athens, Greece

Send your CV to jobs@elvox.net referencing job-code #250402

Activities, engagement, responsibilities :

• Support the CEO/CFO in preparing business plans, budgets and other strategic documents and reports for internal / external use.
• Enhance the existing strategic long-term financial model, budgets, etc.
• Be involved in decision making analysis for operational matters.
• Prepare, design, conduct presentations in powerpoint and be involved in presenting to stakeholders.
• Prepare, participate & follow up the ExCom / Board meetings.
• Conduct market and competitors analysis.
• Project & resources controlling / monitoring.
• Engage in continuous learning and skill development training sessions, and hands-on experience mentored and supported by the management and the team members.

Previous substantial experience in financial modelling. Knowledge of BI and related financial AI tools preferable.

Critical and analytical think and act.

Very good knowledge of excel, powerpoint and English language is a must !

Working timings: Full-time, on-site
Location: Athens, Greece

As an innovative automotive | mobility | technology startup – we foster a culture of focused and streamlined work while cherishing collaboration, cooperation and support to and for each other. Our team thrives in an environment that values both efficiency and camaraderie.

Send your CV to jobs@elvox.net – referencing job-code #250202

Activities, engagement, responsibilities :

• Suggest, develop and be actively involved in the execution of elvoX’s social media marketing strategy, with aim to increase brand awareness and engagement across various channels / platforms such as Linkedin, Instagram, Twitter, Facebook, YouTube, TikTok, etc.
• Be creative and curate engaging content including posts, graphics, videos, and articles to share on social media channels.
• Recommend structure, design and look of elvoX website, assist in developing it and ensuring content is up-to-date, relevant, and optimized.
• Monitor and analyze social media metrics to track the performance of campaigns and identify areas for improvement and come up with suggestions how to make things better.
• Conduct basic research to identify trends, competitor activities, and potential opportunities for the startup in the automotive industry. Advise where we can improve and be better that the competitors in communication and PR.
• Assist and come up with ideas in the planning and execution of PR activities, be actively involved in drafting press releases, media pitches, and building relationships with journalists, influencers and investors.
• Support the elvoX team in planning and execution of events, trade shows, etc.
• Collaborate with internal teams to ensure brand consistency and alignment across all communication channels.
• Monitor industry news and trends to identify opportunities for content creation and thought leadership positioning.
• Engage in continuous learning and skill development training sessions, and hands-on experience mentored and supported by the management and the team members.

Very good knowledge of English language is a must !

Working timings: Full-time, on-site
Location: Athens, Greece

Send your CV to jobs@elvox.net  – referencing job-code #250203